Windows are exposed to dirt, dust, pollen, rain, high winds, sunlight, temperature fluctuations, and so much more. These environmental conditions will eventually take their toll. And without regular maintenance the sealants lose flexibility, finishes fail, components corrode, and movable parts deflect. This is why replacement windows in Seattle, WA need regular maintenance if you hope to keep them looking new. Here are some tips you can use for professional-grade results on routine window maintenance:
Start with an Inspection
Regular inspections should be part of your home maintenance routines. They are the best way to spot minor problems before they become something more. You should inspect your windows at least once a year. Pay attention to major issues like cracks in the glass, damaged frames, or signs of rot or corrosion. You should also watch for minor problems like discoloration or spots from moisture damage. You should even check the fit of the windows and watch out for gaps because frames and sashes are subject to changes in size. Open and close all the windows completely to ensure easy operation and prepare them for cleaning.
Rinse Windows
Before you start cleaning, it is important to first rinse the windows with cool water. This will remove any of the loose dirt and debris that may end up scratching the glass. After the initial rinse, it is time to wash.
Make Washing Solution
You should never use harsh abrasives, acidic solvents, or pressure washers to clean your windows. These do more harm than good and could scratch the glass or discolor the window frames. Instead, you want to combine water, vinegar, and dish detergent into a washing solution. It will gently remove any residue on your windows.
Wash Your Windows
Fortunately, most modern windows have tilt-in or removable sashes for safe and easy cleaning. Otherwise, you might have to use a ladder and extender pole to reach upper story windows. Apply the cleaner with a large sponge or washer arm on an extender pole. Scrub tougher stains with the detergent and a soft-bristle brush. Once you have washed the entire window, rise again until the water runs clear.
Dry With a Squeegee
Drying exterior windows can prove to be a challenge. The easiest way to get a streak-free shine is with a squeegee. Dry the window using a “z” pattern, working from the top to the bottom of the window. After each wipe, dry the squeegee with a towel to prevent drips. Then wipe up any remaining water on the frame with a chamois.
Clean and Lubricate the Tracks
Once the windows are clean and dry it is time to maintain the tracks or hinges. Clear away and loose dirt with the vacuum. Then spray a silicone lubricant into a cloth and rub it into the hinges or the track. Test the operation of the window a couple of times to help spread the lubricant and ensure smooth operation.
For more tips about maintenance and getting the most out of your replacement windows in Seattle, WA calls the window experts at Signature Window & Door Replacement.
