Windows are an essential part of your home. They open to improve ventilation…they let in natural light…they protect your home against the elements and unwanted intruders…and they help keep your home warm in winter and cool in spring. But no windows last forever. Over time, the seals break down, the frames warp and fade, or the glass shatters. These are a few of the most common causes of window failure in Bellevue, WA:

  1. Poor Installation

One of the leading causes of premature window failure is a faulty installation. Some homeowners try their hand at DIY window replacement or hire a general contractor for the job. But window installation isn’t as straightforward as you might think. There are many details and intricacies you need you understand if you want to get the job done right. One mistake and you could render your new fiberglass windows completely useless. The leaks and damage from a poorly installed window could be disastrous. Don’t fall into this trap, no matter how handy you might be. It’s always best to leave all window installations in Bellevue, WA to the professionals.

  1. Accidental Damage

On television, it is usually an enthusiastic youth with a baseball that breaks a window, but accidents can happen for any variety of reasons. Maybe you tip over a piece of furniture or a rock flies out of the lawnmower and breaks the glass. This type of accidental damage is common and while you might be able to get the pane fixed, the window has been compromised. It will never perform as well as it did in the past unless you get the entire unit replaced.

  1. Improper Maintenance

Ideally, you should clean your windows once a week and perform general maintenance tasks once a month. This includes inspecting the glass and frames, cleaning everything, and lubricating the tracks and mechanisms. If you use the proper tools, this will help prolong the life of your windows. But using harsh chemicals, power washers, or abrasives to clean your windows will wear them out much faster and often result in window failure.

  1. High Moisture Levels

There is no shortage of rain and humidity in Bellevue, WA. As a result, your windows are more likely to fog, leak, and suffer from water damage. You will want to watch for signs of mold and moisture damage. It can show up in the form of discoloration, peeling paint, warping frames, or pooling water. It might not seem like much, but if left to fester, rot, mold, and damage could become dangerous and expensive to fix.

  1. Insects and Pests

Termites are terrible for wood windows. But other insects, rodents, and pests trying to gain access your home can also damage your windows. Look for signs of scratching, scraping, and dry rot.

  1. Regular Wear and Tear

With time and use, your windows start to break down. While there are some things you can do to lengthen the life of your windows, eventually you will need to replace them. Modern vinyl, aluminum, and especially fiberglass windows are built to last longer than ever before. Once you make the investment, you can expect your new windows to last anywhere from 20 to 30 more years, with proper maintenance.

Choose Signature Window and Door Replacement for New Windows

Eventually, the windows in your Bellevue, WA home will reach the point of failure and you will need to replace them. If you are looking to invest in fiberglass windows that will last, call 253-887-7792. Marvin Infinity Fiberglass Windows are recognized as the best in the industry and are protected by a lifetime warranty. They will last as long as you are in your home. Visit us at 22613 68th Ave S, Kent, WA 98032 to take a look.